This guide will show you how to setup a transparent Squid proxy with HTTPS support directly on DD-WRT. Let’s dive right in! NOTE: Links will open in a new tab\window. Prerequisites The only requirements are that you have a SSH connection and …
Tag Archives: port
Installing a Transparent Squid Proxy Directly onto a DD-WRT Netgear R7000p Router
Posted by admin
on January 5, 2019
Comments Off on Installing a Transparent Squid Proxy Directly onto a DD-WRT Netgear R7000p Router
Using SSH, Wireshark and tshark to remotely analyze packets…
Posted by admin
on July 21, 2012
Comments Off on Using SSH, Wireshark and tshark to remotely analyze packets…
At home I use ClearOS (free) as my firewall/gateway. The one thing that ClearOS lacks is a graphical packet analyzer. However, the combined use of SSH, Wireshark and tshark solves this problem perfectly. Our first step is to setup a …
ClearOS, Web Proxy, Content Filter and XboxLive…
Posted by admin
on January 23, 2012
Comments Off on ClearOS, Web Proxy, Content Filter and XboxLive…
When using ClearOS’s transparent proxy and content filtering system, XboxLive will no longer work. Even if you add the Xbox’s IP address to the exempt list on the content filter, it will not work 100%. The content filter seems to …
Installing knockd for ClearOS
Posted by admin
on December 21, 2011
Comments Off on Installing knockd for ClearOS
Installing knockd for ClearOS is anything but, trivial if you are not familiar with the platform. I use Ubuntu and was having a hard time with getting knockd to work on ClearOS. These are my adventures (actually fairly simple as …
Recovering a Linksys WRT350Nv1 from soft brick…
Posted by admin
on December 6, 2011
Comments Off on Recovering a Linksys WRT350Nv1 from soft brick…
If you can still ping your router, I would first recommend you try to TFTP the official firmware back to the device. If that does not work, and you believe your boot loader is still intact, you will need to add …
Adding DB9 (serial) port to a Linksys WRT350Nv1 router…
Posted by admin
on December 6, 2011
Comments Off on Adding DB9 (serial) port to a Linksys WRT350Nv1 router…
First you’ll need to grab the Max232 Adapter from here: http://www.compsys1.com/workbench/On_top_of_the_Bench/Max233_Adapter/max233_adapter.html#A232DBH I believe the one I ordered has part number A232DBH3v (I don’t exactly remember as I already had it lying around but, this looks to be the right one.) …