Monthly Archives: December 2011

ClearOS: Edit knockd configuration from webconfig

Today I will show you how to add an admin page to edit knockd’s configuration file from ClearOS’s webconfig: I’ve copied most of these files’ contents from other admin pages and am not exactly sure what some functions do (like …

Read more »

Installing ntop for ClearOS

Installing ntop for ClearOS is trivial. Here’s what you need to do: Then set a password: Lastly, start the service: If you want to be able to control ntop from the webconfig interface you need to add a line to …

Read more »

Installing knockd for ClearOS

Installing knockd for ClearOS is anything but, trivial if you are not familiar with the platform. I use Ubuntu and was having a hard time with getting knockd to work on ClearOS. These are my adventures (actually fairly simple as …

Read more »

Recovering a Linksys WRT350Nv1 from soft brick…

If you can still ping your router, I would first recommend you try to TFTP the official firmware back to the device. If that does not work, and you believe your boot loader is still intact,¬†you will need to add …

Read more »

Adding DB9 (serial) port to a Linksys WRT350Nv1 router…

First you’ll need to grab the Max232 Adapter from here: http://www.compsys1.com/workbench/On_top_of_the_Bench/Max233_Adapter/max233_adapter.html#A232DBH I believe the one I ordered has part number A232DBH3v (I don’t exactly remember as I already had it lying around but, this looks to be the right one.) …

Read more »